|
Following are the steps required to provision the InnoMedia MTA6328-2Re Device for use with the Nuvio Network
|
|
|
| *** |
It is required that you complete the Sunrocket Conversion instructions found at http://www.nuvio.com/sunrocket/conversion.html. and be able to access the Nuvio User Portal at https://sr.nuvio.com/html/ before continuing with this document.
|
| *** |
This document assumes that your computer is connected into the Phone Adapter on the Green LAN Port and that your internal IP Address begins with 192.168.251.x.
|
|
|
| *** |
During this process your Gizmo will be reset to factory default values and will be rebooted twice resulting in temporary loss of internet connectivity.
|
| *** |
If you are using DSL you may need to have access to your PPPoe settings.
|
|
|
| Section 1 |
Resetting Gizmo to Factory Defaults |
|
If you already have the admin password you may skip this section. |
| 1.) |
Open a new browser window and navigate to http://192.168.251.1/, enter "user" as the username and "welcome" as the password. |
|
 |
|
|
| 2.) |
The main configuration screen will now be displayed. |
|
 |
|
|
| 3.) |
Using the same browser window, navigate to
http://192.168.251.1/restore2.ssi. |
|
After approximately 15 seconds you should see a notification that the "Device is restoring to factory default values..." |
|
If you are not returned to the main configuration screen after another minute then manually reboot the device by removing power cord. |
|
Close the web browser you were using. |
|
 |
|
|
| Section 2 |
Configuring Your Gizmo for Nuvio |
| 4.) |
After the device has restarted, open a new browser window and navigate to http://192.168.251.1/Voice_adminPage.htm, enter "admin" as the username and "slapshot" as the password. |
|
 |
|
|
| 5.) |
The main configuration screen will now be displayed. |
|
|
|
|
| 6.) |
From the left menu select "VoIP" and then "SIP Proxy". |
|
 |
|
|
| 7.) |
Set "SIP Proxy:" to "byod.sip.nuvio.net". |
|
Uncheck "Use Outbound Proxy". |
|
Set "Registration Expiration Time (sec.):" to "120". |
|
Set "Preferred CODECs List:" to "G729A/8000" and "PCMU/8000" in that order. |
|
Select the "Save" button. |
|
 |
|
|
| 8.) |
From the left menu select "VoIP" and then "User Account". |
|
 |
|
|
| 9.) |
Open a new browser window and navigate to http://sr.nuvio.com/, enter username and password you received in your Welcome E-mail. |
|
 |
|
|
| 10.) |
Select the "Devices" tab to learn your SIP Username and Password. |
| 10.) |
Copy and paste these into a text file for use in the next step. |
|
 |
|
|
| 11.) |
Set "User ID", "User Name", and "Authentication ID" to the Username copied from the Customer Portal. |
|
Set "User Password" and "Confirm Password" to the Password copied from the Customer Portal. |
|
Set "Use Hot Phone Number:" and "Enable T38 Fax:" to "No". |
|
Select the "Save" button. |
|
 |
|
|
| 12.) |
From the left menu select "IP Network" and then "Provisioning Settings". |
|
 |
|
|
| 13.) |
Uncheck "Enable Provisioning:". |
|
Clear the value from "Server Name:". |
|
Select the "Save & Reboot" button. |
|
 |
|
|
| 14.) |
Select the "OK" button. |
|
 |
|
|
| 15.) |
The device will now reboot. |
|
 |
|
|
| ** |
The device is now provisioned to utilize your phone service from Nuvio. |
|
|
| Section 3 |
Verifying Your Gizmo Registration |
| 16.) |
Open a new browser window and navigate to http://192.168.251.1/, enter "user" as the username and "welcome" as the password. |
|
|
|
|
| 17.) |
>From the left menu select "Information" and then "Register Status". |
|
 |
|
|
| 18.) |
Line 1 will now be registered. |
|
 |
|
|
